Slap Happy
The slap-back delay is one of the most commonly used delay effects, giving a subtle thickening to the overall sound. It adds solid punch to power chords and depth to articulate solos.
Run to the Edge
Need we say more. Start picking some eighth notes and hear the magic!
Classic long delay with light modulation gives an atomsphereic vibrato effect.
Sparkle & Shine
Light, airy delay with a lush and ambient trail off.
Long and Liquid
Heavier amount of classic delay that hangs in the air long enough to play off of.
Dark Side
Classic delay and modulation warmth, reminiscent of classic tape delay sounds.
Rotating Speaker
Rich, modulation delay that delivers the classic rotating speaker vibe.



Type of Circuitry: Analog Bucket Brigade Devices (BBDs) supported by modern low-noise analog electronics. No microprocessors or digital signal processors.

Bypass: True bypass
Delay Range: 15ms to 600ms. Actual delay time indicated by flash rate of illuminated delay time knob.

Dry Gain: 1dB fixed
Wet Gain: Adjustable from muted to +3dB. At the highest blend settings, the first echo is actually louder than the dry signal.

Repeat Control Range: One repeat to runaway repeats
Modulation Rate Range: 0.2Hz to 4 Hz
Modulation Depth Range: Zero to “over the top”
Auxiliary Functions: Wet channel insert loop, allows external effects to be applied to only the wet signal. Also serves as a wet-only output for wet/dry stereo or studio use.

Dry Frequency Response: <-1dB @ 10 Hz and 100 kHz
Dry Distortion: 0.002% at 250 Hz, 1V RMS output
Dry Noise Floor: -100dBv at output, 400Hz to 20kHz with input unplugged
Wet Noise Floor: -90dBV at output, 400Hz to 20kHz
Input Impedance: 1 Meg (active); open (bypassed)
Output Impedance: 1K ohm

Power: Internal 9V battery or external 9V-18V regulated power supply.
Current Consumption: 11mA typical

Dimensions: Chassis size 2.61″ x 4.90″ x 1.45″ (W x L x H)
Weight: 0.8lb. without battery